Fix-A-Leak by Marlig for Swimming Pool Spa Hot Tub Leaks 32 oz & Pool Leak Detection Kit - Leakmaster Leak Location Dye with Refillable Syringe - Diagnose Leaks in Swimming Pools

Fix-A-Leak by Marlig for Swimming Pool Spa Hot Tub Leaks 32 oz,WhiteFix-A-Leak By Marlig For Swimming Pool Spa Hot Tub Leaks 32 ozPool Leak Detection Kit - Leakmaster Leak Location Dye with Refillable Syringe - Diagnose Leaks in Swimming Pools, Spas, and Hot Tubs (Blue Dye, 8 oz)Anderson Manufacturing Leak Locating Dye Tester Syringe and 8 oz Refill Bottle allows up to 40 refills of syringe.

• Product 1: With pump running add FIX-A-LEAK slowly through skimmer or in front of any other suction intake.
• Product 1: After adding FIX-A-LEAK adjust suction to main drain. If this is not possible, the vacuum cleaner could be used alternatively, simply by placing the vacuum in deepest part of pool and connect to normal vacuum connection. Set filter valve to normal vacuum position.
• Product 1: FIX-A-Leak is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension, either manually using a pool broom or mechanically with an automated pool cleaner every 4-6 hrs. during circulation of water.
• Product 1: After the leak has stopped and given the proper time to cure, (24-48 hrs.) you may return to normal filtration. Sand filters: Set filter valve to filter and resume normal operation. Backwash out unused FIX A-Leak as required. Other Filters: Reinstall filter into tank and Resume operation. Rinse out unused FIX-A-Leak from filter as required.*NOTE* Never let cartridges or DE elements be left to dry before they are cleaned.
• Product 2: PRECISE LEAK IDENTIFICATION - Symptoms of a water leak include structural damage, high water bills, excess chemical use, excess algae growth, and dropping water level. Our DIY kit allows you to pinpoint leak location.
• Product 2: VIBRANT DYE COLOR - We’ve formulated our dyes with high color saturation and visibility so that water movement and the leak can easily be detected from above the water’s surface. The dye is also designed to hold together in water to help in detecting even small and slow leaks. Our dye is available in dark blue to contrast against light backgrounds and fluorescent yellow to contrast against dark backgrounds and be visible in low light conditions.
• Product 2: EASY TO FILL SYRINGE- The kit's prefilled syringe and extension straw allow for easy and precise application of the dye at the location of the suspected leak. It also includes an 8oz bottle that can be used to refill the syringe up to 40 times (~6ml Syringe) for ongoing leak detection.
• Product 2: HOW TO USE - With the included syringe discharge a small amount of dye within ¼ inch of the suspected leak area. Then monitor the dye to see if is pulled out of the pool with the water that is escaping through the leak. Before testing, make sure the pool is filled to its normal operating level and the pump/circulatory system is turned off. Also, it is helpful to clean the pool before testing to avoid leaks being plugged by dirt or debris.